the high desert model home in process
I finished the installation of the radiant barrier for the desert house in the dark - this was the last picture with daylight... Over the weekend, the rebar was finished and so now on Monday I'll spray paint the radiant heating pattern so it will be easy to lay in the radiant tubing with Linda during the week.
Blog Archive
-
▼
2006
(57)
-
▼
October
(20)
- No title
- The view across the living room slab
- We came back the next morning to flood the slab wi...
- 1,300sf of concrete slab with two outdoor courtyar...
- Steel trowel for the final finish. You know when i...
- By the time the pour begins on the last part, the ...
- First, fill in the footings
- the manifold and pressure test gauge
- the compression connections for the manifold.
- all the zip ties get cut off before the concrete p...
- the tubing is held down to the rebar with zip ties
- 1,000 ft. of radiant tubing
- The desert house radiant barrier with 24" o.c. #4 ...
- Fresh out of the box: the Rehau manifold that we'l...
- The desert house, all set for the radiant tubing.
- I finished the installation of the radiant barrier...
- On friday I installed the radiant barrier for the ...
- At the desert iT house, the plumbing has been stub...
- the desert site with plumbing and electrical rough...
- A typical floor outlet
-
▼
October
(20)